|
Product Details:
Payment & Shipping Terms:
|
Software: | Fastcam | Application: | Industrial Metal Cutting, Building, Industrial, Steel Sheet Cutting, Stainless Steel |
---|---|---|---|
Cutting Speed: | 1500mm/min | Woring Area: | 1500mm*3000 |
Motor Type: | Servo Motor | Control System: | Starfire |
High Light: | 1500*3000mm Handheld Plasma Cutting Machine |
Hand Held 1500*3000mm CNC Plasma Cutting Machine
Product Description:
The plasma arc results from electrically heating a gas, typically air, to a very high temperature. This ionizes its atoms and enables them to conduct electricity. A plasma arc torch uses a swirl ring that spins the gas around an electrode. The gas is heated in the chamber between the electrode and torch tip, ionizing the gas and creating plasma. This causes the plasma gas to greatly expand in volume and pressure. The small, narrow opening of the torch tip constricts the plasma and accelerates it toward the workpiece at high speeds (20,000 feet per second) and temperatures (up to 30,000 degrees Fahrenheit).
Flame portable Plasma Cutting Machine features:
1.Faster cuts
2.No pre-heat cycle required
3.Cuts any metal that conducts electricity(unlike oxy-fuel, which can not cut stainless steel or aluminum
4.Offers portability around jobsites
5.Minimizes the heat-affected zone and yields a cut with a small kerf(cut width)
6.Plasma units can also gouge,pierce,bevel,cut holes and trace shapes.
CNC Plasma Cutting Machine Technology Parameter:
Crossbeam Length | 2230mm |
Trail Length | 3500mm |
Effective Cutting Width | 1500mm |
Effective Cutting Length | 3000mm |
Layout | Horizontal,Vertical |
Flame Cutting Gun | 1 group |
Plasma Cutting Function | Yes |
Flame Cutting Speed | «1500mm-only for carbon steel |
Flame Cutting Thickness | «200mm |
Line Drawing Accuracy | 0.1mm |
Moving Accuracy | 0.001 |
Cutting Thickness | 25mm |
Source Power | 100 A |
Resource | 220V/110V 50HZ 200W |
Software | Artcut/6 Caxa/ Autocard |
Tranmission Mode | USB |
Cutting Gas | Acetylene, Propane, Liquefied gas,Gas |
Gap Compensation | Automatic |
Plasma Interference | No disturb |
Automotical Control
Applicable Industry:
CNC Plasma Cutting Machine is widely used in all kinds of carbon materials cutting, mild steel materials cutting and nonferrous metal precision sheet metal cutting.
Functions :
Contact Person: admin
Tel: +8613789855133